Scrubmaster B400-R Series
Key Features of the Scrubmaster B400-R series (R/RM/RH)
- Optional pre-sweep unit available to make it a sweeper scrubber-drier combination machine
- Manual low tip pre-sweep unit (88L) or Hydraulic lift pre-sweep unit (150L) also available
- Self cleaning squeegee blade system
- For long operating times: 810 Ah battery and a large 400 – litre tank
- Quick change battery system to enable continuous cleaning
- Hako-DustStop: Award winning dust jacket to reduce airborne dust particles
- Hako Chemical on Demand – Optional chemical dosing system available
- Hako-AquaStop: Saves up to 50 % water thanks to intelligent brush systems and our automatic water stop system when the machine comes to a halt
- Hako-AntiBac: Antibacterial tank coating to support hygiene sensitive areas
The new Scrubmaster B400-R Series guarantees hours of uninterrupted working and a high area performance thanks to the 400-litre solution and recovery tank and the maximised battery capacity provided by the optional battery changing system.
Equipped with a 3-disc- brush unit in working widths of 123 cm or 155 cm. The Scrubmaster B400 comes with many extras as standard, as well as Hako-specific features such as the on-board dosing system and the ergonomic back-friendly design for the workplace.
From the flexi-wall tank with a two- stage filter system for coarse dirt and fine particles to the fully integrated space-saving dirt hopper, the new Scrubmaster B400-R Series has been designed with attention to every detail.
Each Scrubmaster can be individually configured to ensure that you always have the right machine at hand for your individual cleaning tasks with optimised original accessories that provide more efficiency, environmental protection and occupational safety for perfectly hygienic cleaning results.
The new Scrubmaster B400-R Series is ready for any substantial cleaning task.
| Scrubmaster B400 - R Series - Technical Data | B400 R/RM/RH 1230 | B400 R/RM/RH 1552 |
|---|---|---|
| Working width scrubbing (cm) | 123 | 155 |
| Squeegee width (cm) | 136 | 166 |
| Theoretical area performance (m²/h) | 11000 | 14000 |
| Max. climbing capacity / in cleaning mode without/with X-AC (%) | 6/15 | 6/15 |
| Working speed (km/h) | 9 | 9 |
| Brush system/number of brushes | disc/3 | disc/3 |
| Brush contact pressure (kg) | 55/75/95 | 80/110/140 |
| Solution and recovery tank capacity (L) | 400 | 400 |
| Dirt hopper capacity (gross)* Take-it-Easy high dump** (L) | 2x44, 150 | 2x44, 150 |
| Nominal voltage (V) | 36 | 36 |
| Total output (kW) | 14.7 | 16 |
| Battery capacity max. (Ah) | 540/810 | 540/810 |
| Length with squeegee R/RM/RH (cm) | 202/281/281 | 202/281/281 |
| Width without/with squeegee (cm) | 130/136 | 160/166 |
| Height without/with overhead guard (cm) | 150/212 | 150/212 |
| Weight, ready to use, without driver (kg) | 2110/2260/2420 | 2130/2280/2440 |
| Noise level at the driver’s ear R/RM/RH dB(A) | 68/74/74 | 68/74/74 |
| *Scrubmaster B400 RM | ||
| ** Scrubmaster B400 RH |
Second generation for University of York
The University of York opened in 1963 with just 230 students. Founded on principles of excellence, equality......
Read Case Study
Yorkshire event centre
We, spoke to Venue Manager, Richard Moorhouse about why he chose Hako Machines Ltd. Tell us about......
Read Case StudyWatermill Press
Working in close partnership with our customers we develop the best-fit labelling solutions for your company. Its......
Read Case Study
Fourth Generation Hako for the International Centre for Life
The International Centre for Life is a science village in the heart of Newcastle upon Tyne, UK.......
Read Case Study
Getting around Oxford’s tight corners
As the ‘City of dreaming spires’ it will come as no surprise to anyone that there are......
Read Case Study
C J Lang
It’s a case of night and day when comparing the cleaning capabilities of Dundee based C J......
Read Case Study
The Hut Group
When you’re the largest online retailer in the UK, you need cleaning machines that maintain a high......
Read Case Study
Kelkay give Hako the OK!
Founded over 15 years ago, Kelkay is a market-leading family business in garden landscaping products. Kelkay manufacture......
Read Case Study
Hako Machines top of the class at Longhill Primary School
Longhill Primary School prides itself on delivering a relevant, practical and personalised curriculum to more than meet......
Read Case Study
Coletta & Tyson on choosing Hako Machines Ltd
Based in Yorkshire and established over 70 years ago, Coletta & Tyson are a second-generation horticultural company. Starting......
Read Case Study
Carlisle chooses Hako
Carlisle used a competitive tender to find the correct cleaning solution for the council, as a result......
Read Case Study
Lakeside Energy from Waste
Lakeside Energy from Waste Ltd is a joint venture project between two of the UK’s leading recycling......
Read Case Study
Two years on with Dakin Flathers
Dakin Flathers, are one of the largest bandsaw and bandknife blade manufacturers in Europe. Dakin-Flathers remains a......
Read Case Study
Terrific testimonial from Triesse Ltd
Founded over 40 years ago as a supplier of wood based panel products Triesse has grown to......
Read Case Study
Highlands Car Park First For Hako
A forward-thinking local authority in Scotland has become one of the first organisations in the UK to......
Read Case Study
York Designer Outlet
The McArthurGlen York Designer Outlet is a luxury shopping centre which houses over 120 designer and high......
Read Case Study
Brighton and Hove Bus Company
Brighton & Hove organised horse bus routes first began running in Brighton and Hove around the middle......
Read Case Study
Essential Cuisine
Essential Cuisine was established in 1995 and is a manufacturer of high quality stock powders. In 2013,......
Read Case Study
Ballymore
Ballymore is a developer with vast and varied experience. Acknowledged as pioneers of some of Europe’s largest......
Read Case Study
Oxford University chooses Hako Machines Ltd
When thinking of the most esteemed university in the UK, Oxford University certainly springs to mind. As......
Read Case Study
Ford & Slater
Ford & Slater have been in business since 1928 and are one of the largest DAF Trucks......
Read Case Study
Paultons Park
Paultons Park is a family run theme park located on the south coast of England near Southampton.......
Read Case Study
South Lakeland District Council
South Lakeland District Council is based in Kendal and covers most of Cumbria. The high year-round tourist......
Read Case Study
Twinings
Twinings are a leading manufacturer of high quality teas with over 300 years of history at their......
Read Case Study
York Racecourse
York Racecourse was voted 2011 Spectator Sports Ground of the Year amongst a long history of awards......
Read Case Study
Trafford Centre
When you have over 30 million visitors each year like Manchester’s Trafford Centre, having fully trained operatives......
Read Case StudyOUTRIGHT PURCHASE
Hako Machines have a number of flexible purchase options to suit your needs, one of which is outright purchase. No deposit is required and upon receipt of a purchase order and the opening of a credit account, flexible payment terms can be offered. Once opened, a credit account can be used to purchase parts on account.
Our machines come with a warranty period of either 12 months or working hours depending on the equipment and whichever comes first.
If you feel that outright purchase is the right option for your business needs, Hako Machines can also offer a comprehensive range of service packages to ensure that your machine is maintained by our factory trained engineers.
RENTAL
Through our Finance Partner PMD Leasing, we are able to offer attractive Rental/Contract Hire packages. Benefits include;
- Renting it over a period in return for fixed rental payments allows you to free up working capital for use in other areas
- You don’t have to pay the full cost of the asset up front, so you don’t use up your cash or have to borrow money
- You have access to a higher standard of equipment, which might be too expensive for you to buy outright
- You pay for the asset over the fixed period of time that you use it, which helps you budget for the future
- The business can usually deduct the full cost of lease rentals from taxable income
- You do not have to worry about maintenance and breakdowns
- Should circumstances change, upgrades to the equipment are available
- After the initial term of the agreement, the ageing asset can either be returned or extended to suit needs at that time
SHORT-TERM HIRE
A selection of ‘Spot-hire’ machines are available upon request to assist with;
- Emergency cleaning requirements or ad-hoc deep cleaning
- Cover for breakdown machines
- Cover for new machine deliveries
- ‘Try before you buy’
Availability is not guaranteed and a short term hire document will be required before the hire commences. Flexible terms are available depending upon your needs.
